Did you like how we did? Rate your experience!

Rated 4.5 out of 5 stars by our customers 561

Video instructions and help with filling out and completing 944 Pr Irs Form

Instructions and Help about How Form 944 Pr Attach

Bring the hob and blanket into the installation area and rest them on the counter unpack the Haab by guiding a knife along the corners of the packaging taking care not to damage the product remove the packaging from the hob and place the burner and pan supports onto the blanket put the polystyrene to one side to use later as a base for the gas hob pick up the gas hob and place it upside down onto the polystyrene supports take a moment to read through the manual to make sure you fully understand the installation process for the next step you will need a screwdriver the four screws and the four brackets mount the four brackets onto the corners angle towards the center of the hob mount the knee to the gas pipe using a wrench attach the sealant tape carefully onto the edges of the hob insert the hog into the worktop cutout making sure the electrical cord goes through the hole replace the burners and pan supports onto the hob you remove the door from a furniture you and from beneath ahaab turn the four brackets into position fixing the hop to the worktop place the drawer back into position your installation is now complete and ready for your customer.

If you believe that this page should be taken down, please follow our DMCA take down process here.